Archive for the ‘Roller Link’ Category

Roller Chains And Roller Chain Links

Friday, January 29th, 2016

Roller chains are used as the chain drive for many types of commonly used machinery. The chain, also known as a bush roller chain, powers industrial, domestic, and agricultural machinery, including cars, conveyors, bicycles, and motorcycles.

The chain is constructed from roller chain links held together by side links. The entire chain is then driven by a sprocket, a toothed wheel which turns, pulling the chain.

(more…)

Hitachi – Inspire the “Next” ….

Thursday, April 7th, 2011

Hitachi is one of the largest, most diversified manufacturers in the world with annual sales of approximately $80 billion, US.  They have service centers located in Atlanta, GA; and Portland, OR with warehouses in Los Angeles, CA; Chicago, IL; and Winnepeg, MB Canada.

Hitachi was founded in 1910; and in the current years while the world and society have changed greatly, they have never lost their pioneering spirit.  As a pioneer in the industry, Hitachi cast its first malleable iron chain in 1910 and is now one of the world’s larges chain manufacturers.  Today, the Inspire Series SBR chains, supplied by Hitachi Maxco, are the highest rated standard roller chains in the world.

They have adopted the phrase “Inspire the Next” as a declaration of their vow that the Hitachi brand will meet the expectations of their customers society in this new age.  The statement embodies Hitachi’s commitment to continue to inspire coming generations with the latest products, systems and servicesm for a more vibrant society.  It is also an expression of their strong commitment to boldly face whatever new challenges the times want to throw at them … Whatever comes “Next”.

Users of products supplied by Hitachi Maxco can be assured of the latest in technology, engineering and application, all within their perpective of commitment to “Quality”.

Hitachi — Inspire the Next

Thursday, February 3rd, 2011

General Information

Chain Construction

Riveted Chain

Riveted chains possess pins which are dual staked on both sides of the chain.

Cottered chain

Cottered chains possess pins which are dual staked on one side of the chain. On the other, the chains have cottered pins assembled through drilled holes. Cottered chains are slightly easier to assemble and disassemble in the field and are more common on larger pitch chains. Cottered chains are available from stock beginning with 3/4 inch pitch (#60) chain.

Multiple strand chain

Multiple strand chains are available when space is limited on roller chain drives. These chains allow the horsepower capacity to be increased, without increasing the diameter of the sprockets. Middle link plates are slip fit as standard however, press fit plates are available for severe applications.

Roller chain parts

Connecting Link
Offset Link
Two Pitch Offset Link
Roller Link
Pin Link

Ordering Cut-To-Length roller chains

Cut-To-Length roller chains may be ordered in a variety of configurations with an odd or even number of pitches. When ordering it is important to specify both the length in pitches and the configuration including whether a strand contains connecting links, offset links, etc. Conversion tables are available to our salespeople for converting pitches to feet.

The following are the most common configurations for roller chains:

Even number of pitches:

8 Pitches Connecting link at one end
16 Pitches Endless (no connecting link)

Odd number of pitches:

7 Pitches one connecting link and one offset link
7 pitches roller link at each end
7 pitches one connecting link at each end